FlavrQ Grilling System Starter Kit

Please measure the area and the height inside your grill before ordering, as follows:

Area:  The FlavrQ Grid will fit a gas grill with a minimum inside measurement of 14 ½” in the direction parallel to the radiant bars/heating elements (typically front to back), and an inside measurement of at least 12” perpendicular to the radiant bars/heating elements (typically side to side). Larger grills may accommodate multiple FlavrQ Grids — please measure carefully before ordering.

Height: Measure the distance from the top of the radiant bar/heating element covers to the bottom of the cooking grate. The FlavrQ System should work if this distance is 1 1/4” to from 6”. When installed, the top of your cooking grate should be at least 1 ½” above the top of the FlavrQ Grid. 

Important: Never use the FlavrQ Grilling System without the protective radiant bar/heating element covers (triangular or flat) that came as original equipment with your gas grill in place. 

The FlavrQ Grilling System is designed for gas grills only. Our BBQ accessories kit is compatible with the vast majority of gas grills. However, it is not designed for butane or electric table top grills.

12” x 14” x ½”. Please measure the inside dimensions of your grill and make sure it can accommodate the FlavrQ Grid before placing an order. For more information before ordering, click here.

Our patented Charcoal Chips™ is much more efficient than conventional charcoal briquettes. It uses 75% less fuel to get the same results, so one pound of Charcoal Chips™ equals four pounds of traditional charcoal. In other words, you’re receiving the equivalent of twelve pounds of charcoal with the FlavrQ Starter Kit. 

As an added bonus, Charcoal Chips™ reduces charcoal storage space by 80%.

Yes, the FlavrQ Grid doesn’t permanently modify your gas grill. You can easily remove it and grill with gas only just like before. However, we recommend keeping the FlavrQ Grid installed even when you’re not using Charcoal Chips™ because it helps boost radiant heat distribution while you’re grilling with gas only.

Installing the FlavrQ Grid is fast and easy, requiring no special tools or knowledge. Simply remove your grill’s grate, place the FlavrQ Grid on your grill’s radiant bars, and replace the grate. Now you’re ready to add Charcoal Chips™ and start grilling like a pro!

For step-by-step instructions, please see our How It Works page.

No, the FlavrQ Grid is designed to be used with Charcoal Chips™ only. Using other fuels could damage the FlavrQ Grid and void your warranty.

For best results, we recommend a depth of ½” to ¾”. The FlavrQ system is designed for portion-controlled grilling, so you only need to place Charcoal Chips™ underneath the grilling areas where the food will be cooked.

After installing the FlavrQ Grid and adding Charcoal Chips™, ignite your grill at the highest heat level. Unlike conventional charcoal, you don’t need to wait until gray ash appears to start grilling with the FlavrQ grill accessories kit. As soon as the Charcoal Chips™ is glowing, you’re ready to grill. 

Keep the heat on high throughout the entire grilling session to achieve the best possible flavor and sear.

Yes, while refueling isn’t usually necessary, the FlavrQ BBQ accessories kit allows for easy refueling as you go. Simply drop more Charcoal Chips™ onto the FlavrQ Grid.

You should only need to clean your grid after several grilling sessions. Compared to conventional charcoal, Charcoal Chips™ reduces residual ash by 90%.

Absolutely! In fact, we encourage it. The FlavrQ Grilling System is designed for professional-style grilling, so we recommend designating three sections for flavor-sear, finishing, and holding. Unleash the ultimate grill master in you!

Because the FlavrQ Grilling System boosts your gas grill’s temperature by 100° or more, it sears and seals food 50% faster. You may want to keep a closer watch on your food than usual as you get used to the performance upgrade.

To learn more about the FlavrQ grill accessories kit, check out our How-To, Dos and Don’ts, and FAQs pages. Feel free to contact us if you have any further questions or comments.